70% Savings on Blackfin Processor Development Tools
For a limited time, you can purchase a Blackfin development tools bundle at a 70% savings. The bundle includes VisualDSP++ Development Software for Blackfin and the High Performance USB-based Emulator. Click here for purchasing details.

Telelogic Modeling Community: Whitepapers - UML, C/C++, OO Programming

article    

Designing small, dense layouts for medical electronics products
Many considerations go into designing and producing small PCBs for today’s portable and handheld medical devices. The end-to-end process, from component selection to testability, is critical to a successful design. Zulki walks through several decisions designers should carefully consider when designing for assembly process, including mixed signal layout tips.
preview: http://www.embedded-computing.com   date: 1/13/2008

article    

Advanced image processing enables UAVs to fulfil their potential
Real-time image processing hardware has significant potential to efficiently and practically solve a number of problems currently faced by autonomous systems. A recent trial for autonomous airborne refuelling has demonstrated the potential – and great success – of applying image processing to an extremely challenging problem.
preview: http://www.mil-embedded.com   date: 7/8/2008

article    

Advances in NV-SRAM technology provide robust memory in military apps
Improvements in NV-SRAM and the CMOS process have resulted in faster access times and higher densities for high-reliability military applications that previously struggled with the challenge of nonvolatile memory.
preview: http://www.mil-embedded.com   date: 1/13/2008

article    

Avionics bus interface revolution
Avionics buses are traditionally slow to evolve, partly because requirements change so slowly and partly because of the costs of development, certification, and sustainment. It is with the development of new airplanes that the demand for new bus architectures evolves. This can be seen in the adoption of Fibre Channel for JSF and ARINC 664, also known as AFDX for new Boeing and Airbus airplane types. Some buses, although ideally suited technica...
preview: http://www.mil-embedded.com   date: 7/8/2008

article    

Brushing up on motor control
Embedded technologies in ground-based fighting vehicles are often considered to be sensors and weapons plus command, control, and communications subsystems that directly assist the commander and crew to accomplish their mission. However, in addition to these high-profile, compute-intensive technologies, a modern fighting vehicle is a remarkably complex machine with large numbers of motor-driven components such as a turret, gun, hatches, fans, ...
preview: http://www.mil-embedded.com   date: 1/13/2008

article    

Built-in-Test plays a key role in system integrity
Often perceived as just a tick in the box during the selection process, Built-in-Test (BIT) is an invaluable component of modular, embedded systems that are used for critical applications such as avionics mission systems, sensors, and weapons. BIT provides a level of confidence in the correct operation of each module at both power-up and during normal operation. As more of these critical embedded systems are assembled from off-the-shelf hardwa...
preview: http://www.mil-embedded.com   date: 5/9/2008

more 1   2   3   4   5